| CAS No.: | 25135-73-3 |
|---|---|
| Formula: | No |
| EINECS: | No |
| Usage: | Powder Coating, Electrical Insulating Varnish, Rack, Furniture, Locker, Cabinets etc |
| Color: | Ral Pantone |
| Appearance: | Powder |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Powders come in a wide range of colors and textures. Gloss levels range from standard matt (30%), satin (60%), gloss (70%) to high gloss (80%). All +/- 5%. Applied film thickness is a minimum of 40 microns and up to 200 microns for thermoplastic powders.
Powders so prepared give matt finish powder coating which can be obtained easily and with precoatings which give somewhat acceptable matt finishes involved adding matting agents of varying types, but. Generally the degree of mattness was difficult to predict.
Matt finish powder coating due to the low gloss level is very good at concealing surface imperfections. Due to the textured finish, the surface is more difficult to clean than a surface with a higher gloss level. Unless stated otherwise this is the standard finish supplied.1.Good weather resistance, suitable for outdoor product
2.Nice Mechanical Property
3.Has good edge coverage ratio
4.Strong Covering ratio, high coating ratio
|
Product Detail |
|
|
Type |
Matt Finish Polyester Powder Coating |
|
Color |
RAL and PANTONE or customized |
|
Surface Finish |
smooth/sandy/wrinkle/metallic/chrome/wood/hammer /glitter and customized |
|
Glossy Level |
matt Finish |
|
Coverage |
5~6 square meters per kg at 40~90μm film thickness |
|
Film Thickness |
50~90μm |
|
Specific Gravity |
1.2~1.9 per CBM |
|
Application |
Construction aluminium profile, advertisement board, outdoor lamps, highway guardrail, road fence, outdoor metal furnitures, lamp pile, crust of air conditioner, agricultural equipment or can be used on the surface coatingof other metal work that require good performance in the environment of high-intensity ultraviolet ray. |
|
Application Recommendation |
|
|
Spray Voltage |
60KV---80KV (70KV is suggested for auto coating line) |
|
Spray Pressure |
0.05~0.5Mpa (1.5~0.2Kg/m2 is suggested for auto coating line) |
|
Spray Distance |
10-15cm |
|
Curing Temperature/Time |
Standard curing temperature 200ºC in 10-15mins, for large object, curing time up to 15mins |
|
Storage Stability |
|
Store in ventilated, dry, clean room, temperature < 25ºC |
|
Away from direct sunlight, fire, heat |
|
For best performance, use within 1 year |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}