| Customization: | Available |
|---|---|
| CAS No.: | 26123-45-5 |
| Formula: | 26123-45-5 |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DESCRIPTION
Water texture powder coating, also known as water ripple powder coating, is a kind of highly decorative powder coating, which is similar to water ripple pattern after coating. Due to the strong decorative effect of the water texture powder coating and the high requirements for product design technology, production and manufacturing equipment technology and coating process. In addition, the cost and price of this kind of powder coating are higher than that of the conventional powder coating, which can be used in different indoor and outdoor environments, so the water texture powder coating is often used as a high-end decorative powder coating in the market on the promotion and application.
The effect of water ripple powder coating is similar to that of water ripple. Water texture powder coating can form the effect of large ripple to small continuous grain, which has a very rich texture appearance effect. Due to the rich color of water grain powder coating, from black to white, from red to green, from blue to yellow, from dark color to bright color can be achieved. The water grain powder coating has bright luster, soft luster, and also dead and dry luster. The perfect combination of texture effect, color and luster can realize endless changes. The appearance of water grain powder coating can give people the feeling of touch they want, which can be very smooth and delicate, or very rough, and can meet the requirements of product designers for touch. After being coated, the water grain powder coating forms a film on its surface, which not only brings aesthetic feeling to people, but also greatly extends the service life of the product.
ADVANTAGES
VOC: Powder coatings emit zero or near zero volatile organic compounds.
Environmentally friendly and energy and material efficient.
Powder coating production lines produce less hazardous waste than conventional liquid coatings. No paint sludge is produced, as arises from water-wash booths used to trap over-sprayed liquid paint.
Powder coated items generally have fewer appearance differences between horizontally coated surfaces and vertically coated surfaces than liquid coated items.
As Powder Coatings are solvent-free, no oven is required for the flash-off of solvents before curing.
SPECIFICATION
|
Product details |
|
|
Product Name |
water texture powder coating |
|
Material |
epoxy polyester |
|
Color |
black blue and etc. |
|
Surface Finish |
water texture |
|
Gloss level |
>60-90° |
|
Particle Size |
Average 32-42μm |
|
Specific Gravity |
1.2-1.7g per cubic meter |
|
Coverage |
8-10 square meters per Kg at 60-90 μm film thickness |
|
film thickness |
Not less than 100μm |
|
Powder coated Film Mechanical Properties |
|
|
Adhesion |
Cross-cut(2mm),no loss of adhesion |
|
Impact Resistance |
Direct impact 50kg/cm |
|
Pencil Hardness |
1H-2H |
|
Cupping Test |
6mm Mandrel |
|
Bending Test |
5mm |
|
Powder Coated Film Chemical Resistance |
|
|
Salt Spray Test |
5% NaCl Solution for 500 hours - No change |
|
Acid Resistance |
5% NaCl Solution for 500 hours - No change |
|
Alkali Resistance |
3% NaOH for 240 hours dip test - No change |
|
Storage Stability |
|
|
Store in ventilated, dry, clean room, temperature < 25ºC |
|
|
Relative humidity 50-65% |
|
|
Away from direct sunlight, fire, heat |
|
|
Away from direct sunlight, fire, heat |
|
){kind=link}