| Customization: | Available |
|---|---|
| CAS No.: | 26123-45-5 |
| Formula: | 26123-45-5 |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Sand finish powder coating is as a kind of environment-friendly type coating, have solvent-free, lowly pollute, coating process is simple, the coating efficiency advantages of higher. The powder coating solidification rear surface of generally using at present is smooth, stiff, feel is poor, lack stereoscopic sensation. Along with developing rapidly of powder coating industry, people are to oneself decoration through no longer being satisfied with dull gloss or colour-change such as the various household electrical appliances that will apply, equipment, art-type powder coatings is owing to making film coated surface have decorative pattern clearly attractive in appearance, give the device that is coated with attractive in appearance, colorful outward appearance, the lip-deep defective of coated article is covered up by its texture effect, improve film ornamental, obtain the unapproachable decorative effect of common decoration sand finish powder coating, therefore obtained in recent years very large development. Sand finish powder coating is with outstanding outward appearance visual sense, outstanding concavo-convex sense of touch, the physical and mechanical properties of excellence and the favor that good covering effect constantly obtains people.
USE METHOD
Recommended dosage: 0.1% to 0.3% of the total formula.
When using this product, it is pre-dispersed by mixing with the filler used in the formula at a ratio of 1:10, and then mixed and dispersed with other components in the formulation.
STORAGE CONDITIONS
Moisture-proof paper bucket with PE inner bag, N.W: 25kgs/Bucket
This product is non-dangerous goods; transport process should avoid severe vibration, to avoid high temperature sunshine, to prevent product agglomeration
Stored in a cool dry and ventilated place, at room temperature to maintain stability. The shelf life is 2 years at room temperature below 25 ° C
SPECIFICATION
|
Product Details |
|
|
Surface Finish |
Sand Texture |
|
Gloss level |
10%±5% |
|
Particle Size |
Average 32-42μm |
|
Specific Gravity |
1.2-1.7g per cubic meter |
|
Coverage |
6-8 square meters per Kg at 30-90 μm film thickness |
|
Film thickness |
50-70um |
|
Application Recommendation |
|
|
Application Voltage |
40-60 KV |
|
Gun to Component Distance |
15-30CM |
|
Curing Temperature |
200ºC X 10min |
|
Powder coated Film Mechanical Properties |
|
|
Adhesion |
Cross-cut(2mm), no loss of adhesion |
|
Impact Resistance |
Direct impact 50kg/cm |
|
Pencil Hardness |
2H |
|
Cupping Test |
6mm Mandrel |
|
Bending Test |
5mm |
|
Powder Coated Film Chemical Resistance |
|
|
Salt Spray Test |
5% NaCl Solution for 500 hours - No change |
|
Acid Resistance |
5% HCl for 48 hours DIP test - No change |
|
Alkali Resistance |
5% NaOH for 48 hours DIP test - No change |
APPLICATIONS
PRODUCTION PROCESS
QUALITY CONTROL Test gloss Test film thickness Cross-cut test Impact resistance testLPSD Gel time test Pencil hardness test Color difference test
PACKAGE AND DELIVERY
CERTIFICATES
Purchase Note:
1.MOQ :
The minimum order is 500kgs ,each color ≥ 100kgs
2.Colors:
RAL color: We usually use RAL colors that is widely used in paint industry and easily find in market.
Custom color: Color matching is available, if you have colors panel, please send to us for matching.
3.Prices:
Prices depend on the colors and using environment , please tell us the colors and using
environment (indoor use or outdoor use).
4.Time of delivery :
Production will take about 5-8 days after receipt of prepayment, it depends on the quantity.
5.Payment :
30% T/T prepayment , 70% T/T before shipment (or against BL) or LC at sight.
6.Samples:
1kg powder sample is available for each color for your testing.
Sample is free of cost, but we will highly appreciate if you pay for the courier charge.
){kind=link}